DigiflowFlowX3 Flow Sensors
- Type F3.00 And F3.01

The Type F3.00/F3.01 Paddle Wheel Flow Sensors are the core items in the Digiflow® FlowX3 line. A square wave output signal is generated with frequency proportional to rate of rotor rotation and flow velocity. This pulse output is normally fed to a FlowX3 flow monitor/transmitter, blind transmitter, batch controller or adjustable flow switch. It can also be fed to other brand instruments or PLC’s.

Two types of sensors are available, Hall Effect which requires a 5 to 24 VDC power supply and Coil Effect which operates with less power, 3 to 5 VDC. Coil is required with the battery powered flow monitor. Hall Effect signals may be transmitted up to 300 meters (984 ft.) without the need for conditioning whereas Coil Effect signals may be transmitted up to 16 m (52.5 ft.) without conditioning.

Type F3.00 & F3.01
Body Materials:	CPVC, PVDF, 316L Stainless Steel, Brass
Rotor:	ECTFE (Halar®)
Shaft & Bearings:	Ceramic
Seals:	EPDM, Viton®
Pipe Sizes:	1/2"– 24" in two sensor lengths, L0 or L1. See Installation Fittings.
Flow Ranges:	See Callibratrion Factors
	Type F3.00 & F3.01 Flow Sensor Data Page