|
|
DigiflowFlowX3
No-Flow Switches
- Type F3.05
|
|
The Type F3.05 No-Flow Switches offer reliable pump protection. They open an electrical circuit when flow velocity decreases below 0.15 m/s (0.5 ft./sec.) and are not adjustable. The unique Halar® paddle wheel design is not available from other manufacturers.
|
Type
F3.05
|
| Body
Materials: |
CPVC,
PVDF, 316L Stainless Steel, Brass |
| Rotor:
|
ECTFE
(Halar®) |
| Shaft
& Bearings: |
Ceramic |
| Seals: |
EPDM,
Viton® |
| Pipe
Sizes: |
1/2"–
24" in two sensor lengths,
L0 or L1. See Installation Fittings |
| Velocity
Trip Point: |
0.15
m/s (0.5 ft./sec.) not adjustable. The normally
open contact closes after a delay of 2 seconds. |
| Visual
Flow Indiction: |
Bicolour
LED
Red = No Flow, Green = Flow
|
| Relay
Output: |
Mechanical
SPST contact,
No Flow = open contact
1A @ 24 VDC, 0.5A @ 125 VAC,
0.1A @ 230 VAC |
|
Type
F3.05 No-Flow Switch
Data Page |
|
|
Back to
Digiflow FlowX3
Back
to Controls
& Flow Meters
Back to Canadian
Product Line
Back to
UK Product Line
Back to U.S.A.
Product Line
|
