DigiflowFlowX3 Oval Gear Flow Sensor
- Type 3.80

The Type F3.80 Oval Gear Flow Sensors are positive displacement flow meters suitable for high viscosity fluids up to 1,000 cP. Accuracy and repeatability is high.

Inside is a transducer and two oval gears oriented at 90 degrees to each other with embedded permanent magnets. A square wave output signal is generated with frequency proportional to rate of rotor rotation and flow velocity. This pulse output is normally fed to a FlowX3 flow monitor/transmitter or batch controller. It can also be fed to other brand instruments or PLC’s.

Polypropylene Version
Sensor Body:	Polypropylene
Oval Gears :	ECTFE (Halar®)
Shaft:	Zirconium
O-Ring:	Viton®
Connections:	Inline 1/4" BSP female threaded
Flow Ranges:	F3.81.H Model: 10 to 100 l/h (0.044 to 0.44 gpm) F3.82.H Model: 25 to 150 l/h (0.11 to 0.66 gpm)
	Type F3.80 Oval Gear Flow Sensor Data Page

ECTFE Version
Sensor Body:	ECTFE (Halar®)
Oval Gears :	ECTFE (Halar®)
Shaft:	Zirconium
O-Ring:	Viton®
Connections:	Inline 1/4" BSP female threaded
Flow Ranges:	F3.81.H Model: 10 to 100 l/h (0.044 to 0.44 gpm) F3.82.H Model: 25 to 150 l/h (0.11 to 0.66 gpm)
	Type F3.80 Oval Gear Flow Sensor Data Page

Stainless Steel Version
Sensor Body:	316L SS
Oval Gears :	ECTFE (Halar®)
Shaft:	316L SS
O-Ring:	Viton®
Connections:	Inline 1/4" BSP female threaded
Flow Ranges:	F3.81.H Model: 10 to 100 l/h (0.044 to 0.44 gpm) F3.82.H Model: 25 to 150 l/h (0.11 to 0.66 gpm)
	Type F3.80 Oval Gear Flow Sensor Data Page