DigiflowFlowX3 Electromagnetic Flow Transmitters - Type F3.60/ Type F3.63 & Type F3.61 Hot-Tap Version

The Type F3.60 and F3.63 are insertion type transmitters. A 4 to 20 mA analog output signal and a digital open collector output signal are generated proportional to flow velocity. These units will handle slurries and high viscosity conductive and homogeneous fluids. They are not affected by ferrous particles which will foul the magnetic rotors of the paddle wheel type. The sensor is suitable for installation on both plastic and metal pipes. Type F3.61 Hot-Tap installation version is available for installation on pressurized pipe. The magmeters are connectable to FlowX3 instruments (see below).

Installed on Plastic or Metal Pipe
Pipe Sizes:	1/2" to 24" pipe
Body Materials:	316L Stainless Steel, PVDF
Electrode:	316L Stainless Steel
Fitting Gasket:	EPDM or Viton®
Housing:	NEMA 4,4X (IP65),PC, PVC
Type F3.60 & F3.61 Installation Fittings:	CPVC Saddles with CPVC or PVDF inserts for 2" to 8" pipe. 316L SS Weld-On Adaptors for 1-1/4" to 24" pipe. PVC Tees for 1/2" to 1-1/2" pipe. Cast iron adjustable saddles for 3" to 18" pipe.
Type F3.61 Installation Fittings:	Hot-Tap installation saddles with 2" brass valve for 3" to 18" pipe. Hot-Tap weld on adaptors for up to 24" pipe.
	Type F3.60/F3.63 Electromagnetic Flow Transmitters & Type F3.61 Hot-Tap Electromagnetic Flow Transmitter Data Page