Digiflow FlowX3 Flow Meters

  • Sensors: Paddle Wheel; Submersible, Mini, High Pressure, Electromagnetic, Hot-Tap, Low Flow, No-Flow Switches, Transmitters. Oval Gear; and Electro-Magentic: Hot-Tap, Transmitters
    Monitors: Powered Batch, Powered Flow, and Battery Flow
    Installation Fittings: Tees, Saddles, Weld-on Adpaters

Description

Digiflow Flow Meters and Instrumentation

The Digiflow® FlowX3 line includes a complete range of paddle wheel flow sensors, instruments and sensor installation fittings. Also included are insertion type electromagnetic flow transmitters.

FlowX3 products provide high quality and state-of-the-art
technology. All products are manufactured under ISO
9001:2000 and conform to the highest CE standards.

✓ High Accuracy
✓ Excellent Low Flow Measurement
✓ Large Flow Velocity Range
✓ Easily Installed into all Types of Piping
Sensor installation fittings are available in a large selection of types, materials and pipe sizes

Technical

Instruments

FlowX3 instruments were first introduced in 2003. The line of instruments has since expanded. A large offering of control outputs includes 4 to 20 mA, open collector (pulse) and relays. All units have LCD displays and LEDs for indication of output status.

Only with Digiflow® FlowX3 can the same instrument be mounted in 3 different ways: directly to the flow sensor, remotely in a panel or on a wall.

M9.00.TM9.00 M9.02.TM9.02 M9.10.TM9.10 M9.20 M9.50.TM9.50
Instrument Flow Monitors / Transmitters Dual Input Flow Monitor / Transmitter Battery Powered Flow Monitor Batch Controller
Configuration Chart
Power Supply 12-24 VDC 12-24 VDC 12-24 VDC 3.6V Lithium
Thionychloride
Size B Batteries
12-24 VDC
Outputs
Solid State Relay (SSR) 1 2 2 2
Open Collector Relay (OC)
Mechanical Relay (SPDT) 1 2 2
Analog Output Signal 1 X 4-20 mA 1 X 4-20 mA 2 X 4-20 mA Visual Display Only
Wiring 2-wire 3/4-wire 3/4-wire 3/4-wire
Compatible Sensors
Coil – Paddle Wheel
Hall – Paddle Wheel
Hall – ULF
Reed – ULF
Electromagnetic
M9.00 M9.02 M9.10 M9.20 M9.50

Sensors

FlowX3 paddle wheel flow meters are of corrosion resistant solid plastic construction. They are recommended for services with up to 10% solids*. Bearings and sensor body near the rotor are designed to be self-cleaning and small magnets in the rotor blade lessen the chance of fouling due to accumulation of magnetic particles in the process. NEMA 6, 6P (IP68) models are available for outdoor or submersible installations.

Type Output Flow, Velocities, Pipe Size Materials
Sensor/Seals
Connects to
F3.00/F3.01
Paddle Wheel
Digital Square Wave 0.15 to 8 m/s

½” to 24″

  • CPVC
  • PVDF
  • SS
  • EPDM
  • Viton
  • Monitor
  • Transmitter
  • Blind Transmitter
  • Batch Controller
  • Adjustable Flow Switch
F3.10
Mini Paddle Wheel
Digital Square Wave 0.25 to 4 m/s

½” to 1-½”

  • ABS
  • EPDM
  • Viton
  • Monitor
  • Transmitter
  • Batch Controller
F3.20
High Pressure
1,600 psi to 120C
Paddle Wheel
Digital Square Wave 0.15 to 8 m/s

1-½” to 8″

  • 316SS
  • Graphite
    flat gasket
  • Monitor
  • Transmitter
  • Batch Controller
ULF
Ultra Low Flow
Paddle Wheel
Digital Square Wave 1.5 to 100 l/h
or 6 to 250l/h¼” male BSP
  • POM
  • ECTFE
  • Viton
  • Kalrez
  • Monitor
  • Transmitter
  • Blind Transmitter
  • Batch Controller
  • Adjustable Flow Switch
F3.80
Oval Gear
Positive displacement
fluids up to 1,000 cP
Digital Square Wave 10 to 100 l/h
or 25 to 150l/h¼” male BSP
  • PP
  • ECTFE
  • 316L SS
  • Viton
  • Monitor
  • Transmitter
  • Batch Controller
F111
Paddle Wheel
for Hot-Tap Installations
Digital Square Wave 0.15 to 8 m/s

3″ to 24″

  • 304 SS
  • Viton
  • Monitor
  • Transmitter
  • Batch Controller
F112
Paddle Wheel
for Hot-Tap Installations
Digital Square Wave 0.15 to 8 m/s

2″ to 12″

  • PVC
  • EPDM
  • Viton
  • Monitor
  • Transmitter
  • Batch Controller
F3.05
No-Flow Switch
Digital Square Wave Trip Point
0.15 m/s½” to 24″
  • CPVC
  • PVDF
  • 316L SS
  • EPDM
  • Viton
  • PLC
F6.30.T F6.30
Blind Transmitter
Analog 4 – 20 mA 0.15 to 8 m/s

½” to 24″

  • CPVC
  • PVDF
  • SS
  • EPDM
  • Viton
  • PLC
F6.60.T F6.60M/F6.63M
Electromagnetic
Flow Transmitters
Digital Square Wave 0.15 to 8 m/s

½” to 24″

  • CPVC
  • PVDF
  • 316L SS
  • EPDM
  • Viton
May be fed to
Monitor
Transmitter
Batch Controller
F6.61.T F6.61M
Hot-Tap
Electromagnetic
Flow Transmitters
Analog 4 – 20mA and/or Frequency 0.05 to 8 m/s

½” to 24″

  • 316L SS/PVDF
  • CuNi Alloy/PVDF
  • 316L SS/PEEK, EPDM
  • Viton
  • May be fed to
  • Monitor
  • Transmitter
  • Batch Controller

Installation Fittings

For all Digiflow Sensors: Tees, Bolt-on Saddles, Metal Strap-On Saddles, Weld-On Adaptors, 316 SS Threaded Tees, Hot-Tap Fittings and Saddles, Plugs.

Installation
Fittings
Size Materials Pressure
Temperature
Tees

Socket
Threaded
Flanged

1/2″ to 1-1/2″ Body:
PVC, PP, PVDF
Seals:
EPDM, Viton
150 psi @ 20C (70 Degrees F)
Bolt-On Saddles 1-1/2″ to 12″ Body:
PVC
Insert:
CPVC, PVDF
Seals:
EPDM, Viton, Nitrile
150 psi @ 20C (70 Degrees F)
MSS.T Metal Strap-On
Saddles
3″ to 18″ Body:
Cast Iron/SS
Insert:
PVC
Seals:
Nitrile
150 psi @ 20C (70 Degrees F)
Weld-On Adaptors 1-1/2″ to 24″ 316 SS
Carbon Steel
Brass
PE
Other materials on request
365 psi with metal F3.00 sensor
316 SS
FNPT Tees
3/4″ to 1-1/4″ 316 SS 365 psi with metal sensor
MSS HT.T Hot-Tap Fittings
and Saddles
3″ to 18″ Body:
Cast Iron/SS
Insert:
PVC
Seals:
Nitrile
150 psi @ 20C (70 Degrees F)
Tee’s for F3.10
Mini Flow Sensors
1/2″ to 1-1/4″ PVC 70 psi @ 25C (77 Degrees F)
Plugs for Installation Fittings Body:
PVC, CPVC, PP, PVDF
Seals:
EPDM, Viton