Characterized Control Valves

  • PVC
  • PP
  • PVDF
  • PTFE
  • transparent-1px
  • Series: EE, EK
    Sizes: 1/2″- 4″
    Ends: Flanged
    Type: Single Seat Globe, or Needle Type
    Shaft Seals: PTFE Elbows
    Body Seals: EPDM, FKM (Viton®), FEP

Description

E Series Characterized Control Valves

The Chemline E Series Characterized Control Valves provide extremely precise flow control of aggressive fluids. Valves flow characteristics (Cv vs. lift) follow theoretical linear or equal percentage curves through the entire range of stem travel. This is accomplished with precision made replaceable seats and plugs in a wide variety of Cv values. The Teflon bellows shaft seal provides almost frictionless stem movement and provides over 10 years of maintenance-free operation on aggressive chemical services.

Electrically Actuated (EE Series) Specs:

Power Supply: 115 VAC/50/60Hz
Duty Cycle: 50%
Enclosure Rating: NEMA 4X, IP 65 with temperature
and load protection

Current Draw: 0.23 amps
Maximum Power Consumption: 30 VA

Adjustable Opening/Closing Times:
½” to 2″ valves: 32 to 62 sec.
2-½” to 4″ valves: 55 to 111 sec

Control Input: 0-10 V or 0-20mA

Optional Voltages:  230 VAC/50/60Hz, 24 VDC or 24VAC
4-20mA Retransmit

Pneumatically Actuated (EK Series) Specs:

Actuator Housing: Glass reinforced Polyester
Actuator Springs: Coated SS
Stem and Mounting Hardware: 316 SS

Control Air: Max 90 psi
Operation: Reversible, closed or opened by spring or double acting

Mounting Position: Optional
Air consumption: 0.35-1.0 l/lift
Stem Lift: 15 mm(½” and ¾”), (1″to 2″),
40 mm (2½” to 4″)

Working Pressure:150 psi

✓ Precise and Sensitive
Predictable and repeatable control of corrosive fluids
✓ Changeable Plugs and Seats
Valve CV may be changed later if fluid conditions change
✓ Low Maintenance
✓ Abrasion Resistant

Technical

Pricing

Click below for detailed product information including pricing, availability, and additional supporting documentation.

EE Series – Electrically Actuated Characterized Control

Body Seals Body Material
PVC PP PVDF PTFE
EPDM
FKM (Viton)
FEP

EK Series – Pneumatically Actuated Characterized Control

Body Seals Body Material
PVC PP PVDF PTFE
EPDM
FKM (Viton)
FEP