Hot Tap Paddle Wheel Sensors

PVC
Series:F112
Rotor:ECTFE
Shaft & Bearings:Ceramic
Seals:EPDM and Viton
Pipe Sizes:2″ – 12″
Flow Ranges:0.15 to 8 m/s

Description

Hot Top Paddle Wheel Sensors

The Type F112 Hot-Tap Flow Sensors may be removed and reinstalled while the pipe is under pressure. A square wave output signal is generated with frequency proportional to rate of rotor rotation and flow velocity.

Connectable Instruments: F112.H Hall Effect - Panel/Wall Mount - M9.00, M9.02, M9.10, M9.50 F112.C Coil Effect - Panel or Wall Mount - M9.20

✓ Ceramic Shaft and Bearings
✓ Heavy Duty Design

Technical

Compatibility

Type F112.H Hall Sensors require a supply voltage between 5 and 24 VDC. Hall Effect signals may be transmitted up to 300 meters (984 ft.) without the need for conditioning. This pulse output is normally fed to a FlowX3 flow monitor/transmitter or batch controller. It can also be fed to other brand instruments or PLC's. F112.H Compatibility Chart

Type F112.C Coil Sensors operates with less power, 3 to 5 VDC and are required with the battery powered flow monitor. Coil Effect signals may be transmitted up to 16 meters (52.5 ft.) without conditioning. F112.C Compatibility Chart

Instruments

Connectable Instruments F112.H Hall Effect - Panel/Wall Mount - M9.00, M9.02, M9.10, M9.50 F112.C Coil Effect - Panel or Wall Mount - M9.20
InstrumentM9.00.TM9.00M9.02.TM9.02M9.10.TM9.10M9.20.TM9.20M9.50.TM9.50
Compatibility Chart
Power Supply12-24 VDC12-24 VDC12-24 VDC3.6V Lithium Thionychloride Size B Batteries12-24 VDC
Digital Outputs1 x SSR2 x SSR2 x OC2 x SSR
Analog Outputs1 X 4-20 mA4-20 mA2 X 4-20 mA4-20 mA
Wiring2-wire3/4-wire3/4-wire3/4-wire
Mechanical1 X SPDT2 X SPDT2 X SPDT

Pricing

Click below for detailed product information including pricing, availability, and additional supporting documentation.
Hall/CoilBody Material
PVC
Hall
Coil
Contact Us
close slider


Price & DeliveryApplication/ Product Assistance


ImmediateUpcomingFor Reference