M9.02 Flow Monitor/Transmitter

[wppg_photo_slider id="43"]
Series: M9.02
Window Display: Polycarbonate
Panel & Wall Gasket: Silicone Rubber
Keypad: 5-Button Silicone Rubber
Display: Liquid Crystal Full Graphic Display, White Backlight during standard conditions, Red Backlight in case a set alarm is activated, Green Backlight is case an external device control is activated
Display Readout: Flow Rate – 5 Digits, Resettable Total – 10 Digits, Non-Resettable Total – 10 Digits
Output Signals: 1 x 4 – 20 mA (3/4-wire) and 2 solid-state relay, 1 SPDT Relay

Contact Us

I Require *(Required)
My Need Is *(Required)
Signup For Our eNewsletters:(Required)
* required field


M9.02 2-wire Flow Monitor/Transmitter

The M9.02 3/4-wire flow monitor/transmitter is designed to process the pulse signals from all FlowX3 Hall Effect flow sensors and magmeters. All units have a number of control outputs including 4 to 20 mA, Solid-State, and SPDT relays. They have full graphic backlit displays. The instrument supplies voltage to the flow sensors. The same instrument may be mounted in three different ways: directly to the flow sensor, remotely either panel or wall mounted. The standard configuration is panel mount.

Connectable sensors:
F3.0x Hall Effect Flow Sensors with frequency output, F6.60 Flow Magmeters, ULF Reed Effect Sensors

✓ Easy Set-up
✓ Multi-colour back-light
✓ Multi-language Menu



M9.02 Flow Monitor/ Transmitter M9.02 Compatibility Chart