Digiflow FlowX3 Flow Meters
Digiflow Flow Meters and Instrumentation
The Digiflow® FlowX3 line includes a complete range of paddle wheel flow sensors, instruments and sensor installation fittings. Also included are insertion type electromagnetic flow transmitters. FlowX3 products provide high quality and state-of-the-art technology. All products are manufactured under ISO 9001:2000 and conform to the highest CE standards.
Features & Benefits
- High Accuracy
- Excellent Low Flow Measurement
- Large Flow Velocity Range
- Easily Installed into all Types of Piping
Sensor installation fittings are available in a large selection of types, materials and pipe sizes
Technical Documents
- Digiflow Catalogue
- Installation Guidelines
- Instrument Mounting Kits
- Digiflow FlowX3 - Complete Range of Flow Monitoring Equipment
- Digiflow ChemX3 Product Offering
- Digiflow FlowX3 Build Your Flow Monitoring System
- Digiflow FlowX3 Working Pressure vs Temperature
- Digiflow FlowX3 Calibration Factors for F3.0.F3.3 Flow Sensor
- Digiflow FlowX3 Selection Questionnaire
- Digiflow FlowX3 Calibration Factors for Electromagnetic Flow Transmitter
- Digiflow FlowX3 Sample Case
Commonly used in these markets
Process Industrial
Chemical, Storage & Transport
Aquatic Life Support
Pools, Water Parks
Utility Water
Sensors
FlowX3 paddle wheel flow meters are of corrosion resistant solid plastic construction. They are recommended for services with up to 10% solids*. Bearings and sensor body near the rotor are designed to be self-cleaning and small magnets in the rotor blade lessen the chance of fouling due to accumulation of magnetic particles in the process. NEMA 6, 6P (IP68) models are available for outdoor or submersible installations.
| Type | Output | Flow, Velocities, Pipe Size | Materials Sensor/Seals |
Connects to | |
|---|---|---|---|---|---|
 |
F3.00/F3.01 Paddle Wheel |
Digital Square Wave | 0.15 to 8 m/s
½” to 24″ |
|
|
 |
F3.10 Mini Paddle Wheel |
Digital Square Wave | 0.25 to 4 m/s
½” to 1-1/4″ |
|
|
 |
F3.20 High Pressure 1,600 psi to 120C Paddle Wheel |
Digital Square Wave | 0.15 to 8 m/s
1-½” to 8″ |
|
|
 |
ULF Ultra Low Flow Paddle Wheel |
Digital Square Wave | 1.5 to 100 l/h or 6 to 250l/h¼” male BSP |
|
|
 |
F3.80 Oval Gear Positive displacement fluids up to 1,000 cP |
Digital Square Wave | 10 to 100 l/h or 25 to 150l/h¼” female BSP |
|
|
 |
F3.05 No-Flow Switch |
Digital Square Wave | Trip Point 0.15 m/s½” to 24″ |
|
|
 |
F6.30 Blind Transmitter |
Analog 4 – 20 mA | 0.15 to 8 m/s
½” to 24″ |
|
|
 |
F6.60M/F6.63M Electromagnetic Flow Transmitters |
Digital Square Wave | 0.15 to 8 m/s
½” to 24″ |
|
May be fed to Monitor Transmitter Batch Controller |
 |
F6.61M Hot-Tap Electromagnetic Flow Transmitters |
Analog 4 – 20mA and/or Frequency | 0.05 to 8 m/s
2″ to 36″ |
|
|
Instruments
FlowX3 instruments were first introduced in 2003. The line of instruments has since expanded. A large offering of control outputs includes 4 to 20 mA, open collector (pulse) and relays. All units have LCD displays and LEDs for indication of output status.
Only with Digiflow® FlowX3 can the same instrument be mounted in 3 different ways: directly to the flow sensor, remotely in a panel or on a wall.
 M9.00 |
 M9.02 |
 M9.03 |
 M9.10 |
 M9.20 |
 M9.50 |
|
|---|---|---|---|---|---|---|
| Instrument | Flow Monitors / Transmitters | Dual Input Analog Monitor / Transmitter | Dual Input Flow Monitor / Transmitter | Battery Powered Flow Monitor | Batch Controller | |
| Configuration Chart |  |
 |
 |
 |
 |
 |
| Power Supply | 12-24 VDC | 12-24 VDC | 12-24 VDC | 12-24 VDC | 3.6V Lithium Thionychloride battery size C | 12-24 VDC |
| Outputs | ||||||
| Solid State Relay (SSR) | 1 | 2 | 2 | 2 | – | 2 |
| Open Collector Relay (OC) | – | – | – | – | – | – |
| Mechanical Relay (SPDT) | – | 1 | 2 | 2 | – | 2 |
| Analog Output Signal | 1 X 4-20 mA | 1 X 4-20 mA | 2 X 4-20 mA | 2 X 4-20 mA | Visual Display Only | – |
| Wiring | 2-wire | 3/4-wire | 3/4-wire | 2-wire | 3/4-wire | |
| Compatible Sensors | ||||||
| Coil – Paddle Wheel | – | – | – | – |  |
– |
| Hall – Paddle Wheel | |
|
|
|
– | |
| Hall – ULF | – | |
|
|
– | |
| Reed – ULF | |
– | |
– | |
– |
| Electromagnetic | – | |
|
|
– | |
| Analog 4-20mA Sensos | – | – | – | |
– | – |
| M9.00 | M9.02 | M9.03 | M9.10 | M9.20 | M9.50 | |
Installation Fittings
For all Digiflow Sensors: Tees, Bolt-on Saddles, Metal Strap-On Saddles, Weld-On Adaptors, 316 SS Threaded Tees, Hot-Tap Fittings and Saddles, Plugs.
| Installation Fittings |
Size | Materials | Pressure Temperature |
|
|---|---|---|---|---|
 |
Tees
Socket |
1/2″ to 1-1/2″ | Body: PVC, PP, PVDF Seals: EPDM, Viton |
150 psi @ 20C (70 Degrees F) |
 |
Bolt-On Saddles | 1-1/2″ to 12″ | Body: PVC Insert: CPVC, PVDF Seals: EPDM, Viton, Nitrile |
150 psi @ 20C (70 Degrees F) |
 |
Metal Strap-On Saddles |
3″ to 18″ | Body: Cast Iron/SS Insert: PVC Seals: Nitrile |
150 psi @ 20C (70 Degrees F) |
 |
Weld-On Adaptors | 1-1/2″ to 24″ | 316 SS Carbon Steel Brass PE Other materials on request |
365 psi with metal F3.00 sensor |
 |
316 SS FNPT Tees |
3/4″ to 1-1/4″ | 316 SS | 365 psi with metal sensor |
 |
Hot-Tap Fittings and Saddles |
3″ to 18″ | Body: Cast Iron/SS Insert: PVC Seals: Nitrile |
150 psi @ 20C (70 Degrees F) |
 |
Tee’s for F3.10 Mini Flow Sensors |
1/2″ to 1-1/4″ | PVC | 70 psi @ 25C (77 Degrees F) |
 |
Plugs for Installation Fittings | Body: PVC, CPVC, PP, PVDF Seals: EPDM, Viton |
Valve Specification Guide
Engineering specifications are crucial as they provide precision, clarity, quality assurance and compliance in your projects. Download to save you time and assure accuracy in your specifications.
Chemical Resistance Guide
Corrosion resistance is an important factor in selecting the right material of construction for valves, pipe, tubing, fittings and more. Designed to easily navigate, this guide can be downloaded for easy reference.
Materials of Construction
Understanding materials of construction is essential to the accurate selection of valves, pipe, tubing, fittings and more. Designed to easily navigate, this guide can be downloaded for easy reference.
